Structural and Transport Properties of Mg1−xMnxMn2O4±δ Spinels

The synthesis and structural properties of Mg_1−xMn_2+xO₄, for 0≤x≤1 are described. Complete miscibility in the solid state exists for this system. For the material with the correct stoichiometry, i.e. MgMn₂O₄, the effect of temperature on the cation distribution was investigated= above 600°C the inversion degree (m) starts increasing. The electrical conductivity shows a small dependence on P(O₂) which is consistent with the small oxygen non-stoichiometry determined by means of thermogravimetry. The main contribution to the transport properties arises from the inversion equilibrium. Two distinct conductivity regimes, below and above the inversion threshold, can be assumed to explain the electrical conductivity and thermoelectric power results.     

Direct mass spectrometry of polymers. XIV. Thermal fragmentation processes in poly-schiff bases

The thermal fragmentation processes in poly-Schiff bases have been investigated by direct pyrolysis–mass spectrometry. The mass spectral data show that the thermal fragmentation occurring in the polymers under investigation is characterized by hydrogen transfer reactions. In the case of a totally aromatic poly-Schiff base (polymer I ), the thermal fragmentation process involves hydrogen transfer irom the methyne group with formation of fragments bearing nitrile and/or phenyl end groups. In the case of aromatic-aliphatic poly-Schiff bases (polymers II–IV ), the hydrogen transfer process occurs from the aliphatic methylene groups. The latter process involves a lower energy and therefore occurs at lower temperatures with respect to the totally aromatic polymer I , with formation of thermal fragments bearing olefin and/or imine end groups. Beside these fragments, several thermal fragmentation compounds are also evolved by multiple hydrogen transfer reactions.     

BINOL catalyzed enantioselective addition of titanium phenylacetylide to aromatic ketones

An enantioselective addition of titanium phenylacetylide to ketones, promoted by BINOL, is described; this new enantioselective protocol gives high enantiomeric excess (up to 90% ee) with aromatic ketones using a simple procedure without pyrophoric or expensive reagents.     

Coordinating properties of C2-symmetric chiral bis(oxazolinylpyridinyl)dioxolane ligands

Metal complexes of general formula M(L)X₂ and M(L)X₃ [L = (4S,5S)-2,2-dimethyl-4,5-bis{6-[(4,5-dihydro-4-(S)-(1-methylethyl)oxazol-2-yl)pyridin-2-yl]}-1,3-dioxolane] were obtained by reacting, respectively, Co^II, Cu^II, Ni^II, and Zn^II nitrate salts and the Rh^III chloride salt, with a chiral C₂-symmetric bis(oxazolinylpyridinyl)dioxolane (L) ligand, in MeOH/CHCl₃ solution. A single crystal X-ray analysis was carried out on [Ni(L)(OH₂)₂](NO₃)₂ · 2H₂O and the molecular structure of L was also determined. In the free ligand the two symmetric arms are essentially planar and oriented nearly perpendicular to the dioxolane average plane. In the Ni complex one seven-membered and two five-membered chelation rings are formed. The metal atom also lies on the C₂ axis, and two symmetry-related water molecules complete the octahedral coordination environment. Both compounds crystallize in chiral space groups; the ligand crystallizes in orthorhombic system, space group C 2 2 2₁, Z = 4; the nickel complex crystallizes in tetragonal system, space group P 4₃ 2₁ 2, Z = 4.     

Charge heterogeneity of recombinant pro-urokinase and urinary urokinase, as revealed by isoelectric focusing in immobilized pH gradients

When analysing homogeneous preparations of recombinant pro-urokinase and urinary urokinase by isoelectric focusing (IEF) in immobilized pH gradients, an extreme charge heterogeneity was detected (at least ten major and ten minor bands in the pH range 7–10). This extensive polydispersity was not caused by different degrees of glycosylation, or by IEF artefacts, such as binding to carrier ampholytes or carbamylation by urea. A great part of this heterogeneity could be traced back to the existence of a multitude of protein molecules containing Cys residues at different oxidation levels (-SH, -S-S-, even cysteic acid). Owing to the very large number of Cys residues in pro-urokinase (24 out of a total of 411 amino acids) and to the relatively high pI of its native forms (pI 9.5–9.8; the native form is believed to contain all Cys residues as -S-S- bridges), the presence of SH or cysteic acid residues would increase the negative surface charge, as even SH groups would be extensively ionized. In pro-urokinase, part of the heterogeneity was also due to spontaneous degradation to urokinase and possibly also to cleavage into lower-molecular-mass fragments. When all these causes of heterogeneity were removed, the pI spectrum was reduced to only four, about equally intense, bands. The cause of this residual heterogeneity is unknown.     

Pyrrolopyridine analogs of nalidixic acid. 1. Pyrrolo[2,3-b]pyridines

A series of 4,7-dihydro-4-oxo-1H-pyrrolo[2,3-b]pyridine-5-carboxylic acids was synthesized from ethyl 5-methyl(or 5H)-2-aminopyrrole-3-carboxylate. The starting pyrroles were obtained by reaction of carbethoxyacetamidine with bromoacetone or chloroacetaldehyde. One compound ( 10 ) showed antibacterial activity in vitro.     

Exchange reactions occurring through active chain ends: Melt mixing of nylon 6 and polycarbonate

The chemical reactions occurring in the melt mixing of nylon6/polycarbonate (Ny6/PC) at 240°C were investigated. The reaction of equimolar Ny6/PC blends can be reconciled within the overall scheme of an exchange reaction occurring with the attack of active amino terminals on the inner carbonate groups. We have performed the synthesis of low molecular weight amino-terminated nylon 6 and the effect of the active amino terminal groups on the exchange kinetics was investigated. The exchange reaction yields sizeable amounts of copolymer, in fact after 75 min of melt mixing the (initially equimolar) blend contains 30 mol of unreacted PC and 70 mol of Ny6/PC copolymer (all the Ny6 was therefore incorporated in the copolymer). Trifluoroacetylation of nylon 6 was used to produce CHCl₃-soluble Ny6/PC copolymers, that could be analyzed by NMR. The NMR analysis yielded, beside the copolymer composition, evidence of the presence of urethane units interconnecting the Ny6 and PC blocks. The amount of urethane units increased with the reaction time, indicating a reduction of the block size as a function of the extent of exchange. Our study established the structure of the products formed, provided the materials balance of the process, and investigated some salient kinetic aspects. A thermal degradation study was also performed by thermogravimetry and direct pyrolysis mass spectrometry, to identify the products formed in the thermal treatment of the blends and to investigate the possible role of the inner amide groups in the intermolecular exchange reactions occurring between Ny6 and PC. Our results prove that these reactions occur above 300°C, and that only the cleavage of carbonate groups, by means of Ny6 amino end groups, is actually occurring at 240°C. © 1994 John Wiley & Sons, Inc.     

Monitoring folding transitions of synthetic,branched-chain polypeptides by capillary zone electrophoresis

The coil/helix transition of a synthetic, branched-chain polymeric polypeptide (poly (Lys(Glu(1)-DL-Ala(3))EAK), 50-Lys residues long in the backbone, as a function of increasing molarities of methanol in solution, is here studied by both, circular dichroism (CD) and capillary zone electrophoresis. CD spectra showed that, at 75% v/v methanol, the transition from random coil to fully helical structure was obtained, in a pH 1.1 HCI solution in the presence of 20 mM NaCI. CZE studies, run in parallel, exhibited the classical unfolding to folding sigmoidal transition, with mid-point at 60% v/v methanol concentration, plateauing at ca. 80% v/v organic solvent. Surprisingly, though, such unfolding to folding transition was accompanied by an expansion, rather than a contraction, of the resulting ordered polypeptide. As the charge of the polypeptide (a pure polycation at a pH of 2.1 in CZE) was kept rigorously constant, a plot of the radius of the polymer along the sigmoidal transition clearly showed that the radius of gyration of the helical, structured polypeptide was in fact larger than that of the random coil. Such results were confirmed by molecular dynamics simulations, which indicated that the dimensions of such polypeptide, in alpha-helix configuration, were 8.5 nm (in length) and 3.2 nm (in diameter), whereas those of the corresponding random coil were 7.2 nm (in length) and 5.1 nm (length of shorter axis). It would thus appear that the randomized structure assumes the shape of a more compact object, roughly resembling a "rugby ball".     

12H-naphtho[1′,2′:5,6]pyrano[2,3-d]pyrimidine derivatives

Reaction of 1-oxo-2-formyl-3-dimethylamino-1H-naphtho[2,1-b]pyran with amidines, guanidine, O-methylisourea, S-methylisothiourea afforded 9-substituted 12-oxo-12H-naphtho[1′,2′:5,6]pyrano[2,3-d]pyrimidines. When the reaction with O-methylisourea was carried out in anhydrous pyridine, 10,20-dioxo-10H,20H-dinaphtho[1,2-e:1′,2′-e′][1,5]diazocino[2,3-b:6,7-b′]dipyran was formed.     

On the reaction between 3H-1,2-dithiolo[3,4-b]pyridine-3-thione and primary alkyl and arylalkylamines

3H-1,2-Dithiolo[3,4-b]pyridine-3-thione ( 10 ) reacts with primary alkylamines to give 1,2-dihydro-2-thioxo-3-pyridinecarbothioamides 11a-g and two minor products. Isothiazolo[5,4-b]pyridine-3(2H)-thiones 12a-g and 3-imino-3H-1,2-dithiolo[3,4-b]pyridines 13a-g were isolated and characterized. Further investigations allowed the synthesis of 12 and 13 in good yield.